Это не последняя версия документа.
Для просмотра IPTV в маршрутизаторах MikroTik необходимо:
1). Скачать последнюю прошивку с сайта MikroTik (Upgrade Package и All Packages), как правило прошивка нужна mipsbe (для роутеров RB7xx series, RB9xx series, RB2011 series). Распаковать архив all_packages-mipsbe-x.x.x.zip, оттуда понадобится пакет multicast-x.x.x-mipsbe.npk. Зайти на роутер, в меню files скопировать файлы routeros-mipsbe-x.x.x.npk и multicast-x.x.x-mipsbe.npk. После этого перезагрузить роутер (команда /system reboot) и НЕ выключать питание, через пару минут он загрузится сам. После перезагрузки на роутере будет установлена новая прошивка и пакет multicast.
2). Из консоли (New terminal) ввести следующее (ВНИМАНИЕ: данный сценарий удалит и заново создаст правила ip - firewall):
/ip firewall filter remove [/ip firewall filter find];
/ip firewall filter add chain=input action=accept protocol=icmp ;
/ip firewall filter add chain=input action=accept in-interface=ether1-gateway protocol=igmp ;
/ip firewall filter add chain=input action=accept in-interface=ether1-gateway protocol=udp src-address=10.0.0.0/8 dst-port=1234 ;
/ip firewall filter add chain=input action=accept connection-state=established ;
/ip firewall filter add chain=input action=accept connection-state=related ;
/ip firewall filter add chain=input action=drop in-interface=ether1-gateway ;
/ip firewall filter add chain=input action=drop in-interface=pptp-pskovline ;
/routing igmp-proxy interface add alternative-subnets=10.0.0.0/8 interface=ether1-gateway threshold=1 upstream=yes;
/routing igmp-proxy interface add interface=bridge-local threshold=1 upstream=no;
/interface bridge filter add action=drop chain=output disabled=no dst-port=1234 ip-protocol=udp mac-protocol=ip out-interface=wlan1 src-address=10.0.0.0/8;
PS. Инструкция применима к роутерам с конфигурацией по-умолчанию. Если роутер без WiFi и не имеет интерфейса bridge-local, то в командах нужно заменить bridge-local на ether2-master-local.